Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Headlight Bulb on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight bulb

Are the front headlight bulbs blown? Not sure how to proceed? Let's see how to change them on an Opel Corsa by accessing the engine bay. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Locate the inspection cap of the headlight and remove it. The cap is situated behind the front headlight. Once you find the bulbs with the metal clips, pull the bulb holders out of the headlight. Remove the bulbs. Install the new bulbs (always of the correct type and size) and insert the bulb holder back into the headlight housing. Refit the plastic caps and switch on the headlights. If they do not work, remove the headlights.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog light bulb of the Opel Corsa
Replacement of the front fog light bulb of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Let's see the steps that will allow us to disassemble and replace the front fog light bulb of the Opel Corsa. To access the fog light bulb, it will b…
How to Replace the Front Headlamp Bulb on an Opel Corsa D
How to Replace the Front Headlamp Bulb on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today, we will explain how to independently replace the front headlamp bulb on an Opel Corsa model D. To replace the bulb, open the front bonnet and …
Replacement of the front headlight bulb of the Opel Corsa
Replacement of the front headlight bulb of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In a few simple steps, we will see the process of replacing the headlight bulb of the Opel Corsa. First, we open the hood of the car and start removi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos