Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Discs on Opel Vectra

Model: Vauxhall Vectra Vectra C, MK 3 - Years 2002-2008
Part: Brake rotors

In this video tutorial, you will learn how to replace the rear brake discs on an Opel Vectra. First, lift the vehicle and remove the wheel bolts to take off the wheel: at this point, use a screwdriver to extract the spring of the caliper by prying it off and remove the screw covers of the caliper: loosen these screws with a socket wrench (rear screws). Move the caliper away from the bracket using a screwdriver and remove it. Using a 15 mm socket, loosen the bolts of the caliper bracket and take it off. Now, use a punch to remove the screws around the disc so you can take it off and fit the new one!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Bulb on the Opel Vectra
How to Replace the Rear Brake Bulb on the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) To replace the rear brake bulb on the Opel Vectra, start by opening the boot. Remove the side cover of the headlamp that needs changing. Disconnect t…
How to Replace the Starter Motor on the Opel Vectra?
How to Replace the Starter Motor on the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) To replace the starter motor on the Opel Vectra, open the bonnet to access the plastic cover on top of the engine block: after removing this cover, y…
How to Repair or Replace the Air Vents on the Opel Vectra
How to Repair or Replace the Air Vents on the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Below are the instructions that will allow you to repair or replace the air vents on the Opel Vectra. First, get inside the cabin and start by removi…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos