Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Discs

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Brake rotors

Lift the vehicle with a jack and remove the front wheel (loosen the nuts before lifting the wheel off the ground); then remove the brake caliper bracket and the fixing bolt of the disc to detach it from the hub. Clean the new disc with solvent to remove any oil residues; then position it on the hub aligning the holes with the threaded hole of the fixing bolt, which must be tightened securely. Finally, remount the complete brake caliper bracket: it is advisable to also replace the brake pads, as even if they are not completely worn, they have already taken the shape of the old disc and braking may be ineffective until the pads reshape to the profile of the new disc.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Brake Pads and Discs on Opel Meriva
Replacing Brake Pads and Discs on Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In today's video tutorial, you will learn how to remove and replace the brake pads and discs on a first generation Opel Meriva. First, lift the vehic…
How to Replace the Front Brake Pads on an Opel Meriva A
How to Replace the Front Brake Pads on an Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) This guide shows how to replace the front brake pads on an Opel Meriva A. The first step is to open the brake fluid reservoir and remove the front wh…
How to Replace the Front Brake Pads of Your Opel Meriva
How to Replace the Front Brake Pads of Your Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before starting, engage the handbrake and put the car in first gear. Begin by lifting the front of your Opel Meriva. Once done, unscrew and remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos