Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the front brake pads on an Opel Meriva: the first thing to do is purchase new, high-quality brake pads from an authorised dealer. Next, lift the front of the vehicle using a jack and place safety stands underneath.

Remove the front wheel, then take off the spring using a flat-head screwdriver. Now, remove the protective caps from the pins using the flat-head screwdriver.

Use an Allen key to unscrew the pins of the brake caliper. At this point, use the screwdriver to push back the piston, then remove the caliper and support it so it doesn't fall.

Remove the old brake pad; take the new pad and insert it with a slight pressure. Now install the outer pad and reposition the brake caliper.

Tighten the pins with the Allen key, replace the protective caps, straighten the wheel, and then reattach the spring as shown in the video.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before starting, engage the handbrake and put the car in first gear. Begin by lifting the front of your Opel Meriva. Once done, unscrew and remove th…
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In today's video tutorial, you will learn how to remove and replace the brake pads and discs on a first generation Opel Meriva. First, lift the vehic…
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before you can start, lift the rear of your Opel Meriva. Begin by unscrewing and removing the bolts securing the rear wheel, then remove the wheel it…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos