Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on an Opel Meriva A

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Brake pads

This guide shows how to replace the front brake pads on an Opel Meriva A. The first step is to open the brake fluid reservoir and remove the front wheels using a 17 mm spanner. Once the vehicle is lifted, completely unscrew the wheel bolts and remove them. Use a lever to release the safety spring, and with a 7 mm hex key, unscrew the two bolts securing the brake caliper and remove it. Take out the old brake pads and clean the area. Lubricate the sliding surfaces of the new brake components, install them in position, and push the piston fully back. Refit the brake caliper and the wheels.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on an Opel Meriva 1.4
Replacing Front Brake Pads on an Opel Meriva 1.4
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Want to remove the front brake pads on your Meriva? Here’s how to replace the brake pads. Lift the car on a column lift to the desired height, then r…
How to Replace the Front Brake Pads of Your Opel Meriva
How to Replace the Front Brake Pads of Your Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Before starting, engage the handbrake and put the car in first gear. Begin by lifting the front of your Opel Meriva. Once done, unscrew and remove th…
Removing the Front Brake Pads on an Opel Meriva
Removing the Front Brake Pads on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Here’s how to remove the front disc brake pads on an Opel Meriva. Lift the car using a column jack (crick) to the desired height, then remove the whe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos