Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dashboard Bulb

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Instrument panel light

To replace the bulbs in the instrument cluster, you need to remove it: first, remove the plastic covers located above and below the light switch controls, unclip the control levers of the stalk, the plastic cover just below the steering wheel, and then the plastic trim around the instrument cluster. At this point, you can unscrew the fastening screws of the instrument cluster and remove it from its place to replace the bulbs: it is advisable to replace all of them due to the low cost and, although limited, the complexity of disassembly.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the dashboard display lights of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The instructions in this guide will show us how to disassemble and replace the bulbs of the dashboard display of the Opel Corsa. First, we get on boa…
How to Replace the Instrument Cluster Bulbs on the Opel Corsa C
How to Replace the Instrument Cluster Bulbs on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) To replace the instrument cluster bulbs on the Opel Corsa C, first remove the plastic covers surrounding the steering column. Once these panels are r…
Replacing Front Headlight Bulbs on Opel Corsa
Replacing Front Headlight Bulbs on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in your Corsa blown? Replace them as follows. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and se…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos