Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Replacement diesel filters on Opel Vectra

Vauxhall Vectra - Video tutorial

Model: Vauxhall Vectra MK 3, Vectra C - Years 2002-2008
Part: Diesel filter
Operation: Replacement diesel filters on Opel Vectra

Replacing the diesel filter on Opel Vectra, how to do? Let's see how to proceed. We open the front hood and identify the diesel filter. We disconnect all the electrical terminals and the oil circulation pipes. We extract the diesel filter kit from inside its housing. We open the container and extract the diesel filter. We insert a new diesel filter inside the container, then we mount the filter container inside the engine compartment. We connect all the circulation pipes to the filter container and connect the electrical clamps. We close the front hood at the end of assembly.


Posted on 19 December 2023 by ScegliAuto



Opel Vectra diesel filter replacement
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) In this simple video guide we will show you how to disassemble and replace the diesel filter on the latest version of the Opel Vectra. First we lift
How to replace Opel Vectra rearview mirror
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) Is the exterior mirror mirror on the Opel Vectra broken? Let's replace it with a new one. With a lever with plastic coating we go to pry between the
Where is the fuse box located in the Opel Vectra C?
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) Locating the box containing all the various fuses of your Opel Vectra C is very simple, and with the following mini guide, you will be able to do it

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos