Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb on Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

In this video, see how to remove and replace the front headlamp bulb on a first-generation Opel Insignia, facelift version. First, open the bonnet of your car and remove the windscreen washer reservoir (if from the right side); then remove the plastic protective cap of the bulbs and disconnect the electrical connector of your bulb.

At this point, remove the bulb and replace it with a new one (in this case, an HIR 2). Finally, insert it in the correct orientation and reassemble everything as shown in the video!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on an Opel Insignia
How to Remove the Headlight Bulb on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How do you remove the headlight bulb? Let's see how to remove the bulb from the headlight of an Opel Insignia. Lift the bonnet, locate the inspection…
How to Replace the Front Headlamp Bulb on an Opel Insignia?
How to Replace the Front Headlamp Bulb on an Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the front headlamp bulb on an Opel Insignia, open the bonnet to access the components located inside the engine compartment: here, you wil…
How to Replace the Front Headlamp Bulb on the Opel Insignia
How to Replace the Front Headlamp Bulb on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To replace the front headlamp bulb on the Opel Insignia, open the bonnet to access the engine bay. Remove the plastic cap located at the rear of the …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos