Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : How to replace the headlight bulb on the Opel Insignia?

Vauxhall Insigna - Video tutorial

Model: Vauxhall Insigna MK 1, Insigna A - Years 2008-2017
Part: Light bulb
Operation: How to replace the headlight bulb on the Opel Insignia?

In order to replace the Opel Insignia headlight bulb, the hood must be opened to gain access to the engine compartment. You will need to remove the plastic cap located at the rear of the affected headlight. Once the cap has been removed, it will be necessary to remove the bulb holder, connected to the cables, using a torx wrench. Once the holder has been released from the fixing bolts, it will be possible to extract it together with the bulb itself, so that it can be replaced. Once the replacement has been completed, it will be possible to insert it back into its housing and secure it with the relative bolts.


Posted on 2 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Insigna 2017-2026 - What does code 18 indicate on the Opel Insignia? Read Answer
    • Insigna 2017-2026 - How to replace the daylight bulb on the Opel Insigna? Read Answer
    • Insigna 2017-2026 - What does code 18 mean on the Opel Insigna? Read Answer
    • Insigna 2017-2026 - What does code 18 indicate on the Vauxhall Insigna? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos