Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Support Joint

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Suspension system

See other generations:
This video is currently unavailable

The necessary tools are a ratchet spanner, fixed spanners, and the original replacement joint. Lift the car and secure it to access the underside mechanics.

To access the faulty component, remove the wheel. Once the broken joint is identified, proceed with removal by unscrewing all the bolts.

Also, remove the support of the support arm by unscrewing the two bolts, then remove the rubber joint. Refit the new joint after thoroughly cleaning the fittings and greasing the bolts, then reassemble the previously removed mechanics.

Refit the wheel.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp on an Opel Corsa
Replacing the Headlamp on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Has the headlamp been damaged and you have no idea how to change it? Don’t want to take it to a garage? You can remove it yourself. Open the boot lid…
How to Replace the Rear Fog Light on an Opel Corsa
How to Replace the Rear Fog Light on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) To replace the rear fog light on an Opel Corsa, lift the rear hatch. Once it is lifted, use a tool like a screwdriver to lever the rear fog light out…
Replacing the Rear Shock Absorbers on the Opel Corsa 1.2
Replacing the Rear Shock Absorbers on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) In today's tutorial, you will learn how to remove and replace the rear suspension on the Opel Corsa with a 1.2 petrol engine. First, lift the vehicle…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos