Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : Opel Meriva 2003 wiper blades replacement

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Windscreen wipers
Operation: Opel Meriva 2003 wiper blades replacement

Let's see the replacement of the wiper blades Opel meriva. Take the front brush with your hands, unhook the clamping plastic, pull the mobile brush as in the video (gently without breaking it) and slide it off the arm on the right or left. We mount the new brush on the arm (if the brush is not original we have to remove the piece). We lower the wiper arm onto the windshield and carry out the same operation on the second blade. We turn on the instrument panel to carry out the function test, we use the control levers to activate the brushes.


Posted on 16 January 2024 by ScegliAuto



Opel Meriva wipers replacement
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) How to remove the wiper blades of an Opel Meriva? Let's see the replacement of the pieces. Take the front brush with your hands, unhook the clamping
How to disassemble the taillight in the Opel Meriva?
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) In this tutorial we can see how to disassemble the rear light on the Opel Meriva, an extremely simple and fast operation. First of all, make sure tha
How to change the air filter on the Opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) To complete the replacement of the air filter in your Opel Meriva A (year 2003-2010), it only takes a few minutes. With the following guide, you will

    Frequently Asked Questions

    • Meriva 2010-2017 - Where is the wiper reservoir located on an Opel Meriva? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos