Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the On-Board Computer on an Opel Mokka X

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Onboard computer

See other generations:
Video tutorial

Get a plastic wedge and first remove the left part of the trim by prying it at the gap. Similarly, remove the central part, which is the frame of the radio screen. Detach the trim located below the screen that reaches the top of the glove compartment (passenger side).

At this point, unscrew the four 7 mm screws that are now exposed using a socket wrench. Finally, you can extract the radio/on-board computer and disconnect its cables.

Proceed in reverse until fully reassembled.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Mokka
How to Reset the Service Light on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video, you will learn how to reset the message on the dashboard indicating the need for a service on the Opel Mokka. The operation is very si…
How to Change the Language of the On-Board Computer on the Opel Mokka?
How to Change the Language of the On-Board Computer on the Opel Mokka?
Vauxhall Mokka (2020-2026 / Mokka B) To change the language of the on-board computer on the Opel Mokka, turn on the instrument panel by inserting the key into the ignition: once the pane…
How to Configure the Radio in the Opel Mokka
How to Configure the Radio in the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Configuring the radio in the Opel Mokka is a very simple and quick procedure to carry out independently. Turn on the instrument panel and the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos