Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight on an Opel Insignia

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Headlight

Let’s look at removing the front bulb of the headlight on an Opel Insignia. Lift the front bonnet, locate the headlight and remove the cover cap located behind it. Once the cover cap is removed, you will find the bulbs with their holders; pull the holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (always of the correct type and size) and insert the holder back into the headlight housing. Close the front headlight of the car. Turn on the new bulbs and test their operation.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Front Bumper of the Opel Insignia
Guide to Removing the Front Bumper of the Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Today, we will discover the procedure to remove and replace the front bumper of the Opel Insignia, following the instructions below. First, open the …
Where is the fuel filter located and how to reach it on an Opel Insignia?
Where is the fuel filter located and how to reach it on an Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Good morning, today we are here to discover where the diesel filter of our Opel Insignia is located and understand how to reach it. The filter is loc…
How to Remove the Front Door Panel on an Opel Insignia?
How to Remove the Front Door Panel on an Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In this tutorial, you will see how to replace the front door panel on an Opel Insignia, a very simple and quick operation. First, open the door in qu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos