Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Right Front Headlight of the Vauxhall Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

Replacing the right front headlight of the Vauxhall Insignia is a very simple and quick operation that can be done independently, also thanks to our video guide. To start the replacement, open the front bonnet and use a spanner to remove the upper headlight cover.

Continue by turning the wheel inwards and removing the wheel arch liner. Disconnect the headlight by removing its connector.

Once the headlight is removed, you can replace the bulb or the headlight itself. To refit the headlight in its housing, follow the same steps in reverse.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How do you remove the front headlight of the Opel Insignia?
How do you remove the front headlight of the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In order to remove the front headlight of the Opel Insignia, you will need to open the hood in order to access the components in the engine compartme…
How to Remove the Front Bumper of the Opel Insignia
How to Remove the Front Bumper of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Here are the steps to remove and replace the front bumper of the Opel Insignia. First, open the bonnet of your car and start unscrewing the fastening…
Where is the radiator fuse of the Opel Insignia located?
Where is the radiator fuse of the Opel Insignia located?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) When the radiator stops working, it is necessary to check the fuse related to it before disassembling it. The radiator fuse on an Opel Insigna vehicl…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos