Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
This video is currently unavailable

Before starting, open the tailgate of the boot of your Opel Insignia. Begin by disengaging and removing the inner side cover located near the rear light.

Then, unscrew and remove the screws that secure the rear light to the vehicle. Once you have removed the fastening screws, the rear light will be free.

Proceed to extract the light from its housing. After completing this step, disconnect the electrical connector, and you will have successfully finished the disassembly.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on an Opel Insignia?
How to Remove the Rear Light on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To remove the rear light on an Opel Insignia, open the tailgate to access the boot. Here, remove the carpet cover located near the light to be replac…
How to replace the headlight bulb on the 2016 Opel Insignia
How to replace the headlight bulb on the 2016 Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) It is very important to immediately replace the non-functioning headlight bulb of your 2016 Opel Insignia if you want to continue driving safely and …
How to Remove the Fog Light on the Opel Insignia 2
How to Remove the Fog Light on the Opel Insignia 2
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) If one of the fog lights on your 2019 Opel Insignia second series has stopped working and you want to know how to remove it, read the following guide…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos