Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : Tail light

Vauxhall Insigna - Tail light

Tail Light Vauxhall Insigna (2008-2017 / mk 1, insigna a)

Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
How to Remove the Rear Light on an Opel Insignia?
To remove the rear light on an Opel Insignia, open the tailgate to access the boot. Here, remove the carpet cover located near the light to be replaced. Once …Read all…
Posted on 17 June 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
How to Remove the Rear Light of an Opel Insignia
Before starting, open the tailgate of the boot of your Opel Insignia. Begin by disengaging and removing the inner side cover located near the rear light. Then, …Read all…
Posted on 19 May 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
Replacing the Stop Light on an Opel Insignia
To replace the stop light on an Opel Insignia, remove the rear light if damaged or if you want to replace the bulbs. Open the boot and secure it; open the …Read all…
Posted on 26 April 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
How to Replace the Rear Light on an Opel Insignia
To begin, open the boot lid to access the rear compartment where the fixings for each individual light are located on either side of the boot. Remove the hard …Read all…
Posted on 10 March 2026 by ScegliAuto
Airbag (7) Antenna (1) Car stereo (8) Battery (6) Grille (1) Transmission (2) Spark plugs (1) Glow plugs (1) Body (1) Control unit (1) Key (23) Timing belt (12) Onboard computer (6) Checks and maintenance (15) Dashboard (2) Shifter boot (1) Brake rotors (1) Headlight (8) Tail light (4) Fog lights (1) Air filter (4) Cabin air filter (11) Diesel fuel filter (5) Oil filter (1) Light bulb (3) Side marker bulb (1) Headlight bulb (15) Tail light bulb (2) Handle (1) Transmission fluid (1) Engine oil (3) Clock (5) Door trim panel (12) Front bumper (4) Rear bumper (1) Brake pads (4) Tires (2) Shift knob (8) Pump (1) Fuel pump (2) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Fuse box (30) Seat (3) Door lock (3) Side mirror (3) AdBlue warning light (5) Warning light – error code (23) Tire pressure warning light (12) Service warning light (109) Fuel cap (1) Cylinder head (1) Turbocharger (2) Windshield washer nozzle (1) Valve (1) EGR valve (3) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos