Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

To begin, open the boot lid to access the rear compartment where the fixings for each individual light are located on either side of the boot. Remove the hard plastic trim secured with a clip at the back.

Now, unscrew the two black hard plastic butterflies to release the light, which you should hold from the other side. Pull the light towards you and disconnect the connectors at the back to finally remove it. This way, you can carry out the necessary replacements and reassemble everything.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on an Opel Insignia?
How to Remove the Rear Light on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To remove the rear light on an Opel Insignia, open the tailgate to access the boot. Here, remove the carpet cover located near the light to be replac…
How to Remove the Rear Light of an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Before starting, open the tailgate of the boot of your Opel Insignia. Begin by disengaging and removing the inner side cover located near the rear li…
Replacing the Stop Light on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To replace the stop light on an Opel Insignia, remove the rear light if damaged or if you want to replace the bulbs. Open the boot and secure it; ope…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos