Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on an Opel Insignia?

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Tail light

To remove the rear light on an Opel Insignia, open the tailgate to access the boot. Here, remove the carpet cover located near the light to be replaced. Once the carpet is removed, you can completely unscrew the three knobs underneath that secure the rear light. This will allow the light to be extracted from its housing by disconnecting its connector. At this point, you can replace the bulbs or directly install a new light that should be properly secured.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of the Opel Insignia?
How to Remove the Front Headlamp of the Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video tutorial, you will see how to remove the front headlamp of the first series Opel Insignia, whether it needs to be replaced, repaired, o…
Replacing the Front Headlamp on an Opel Insignia
Replacing the Front Headlamp on an Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Today's instructions will show you how to remove and replace the front headlamp on an Opel Insignia. First, open the vehicle's bonnet and start unscr…
How to Replace the Front Headlamp Bulb on an Opel Insignia?
How to Replace the Front Headlamp Bulb on an Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the front headlamp bulb on an Opel Insignia, open the bonnet to access the components located inside the engine compartment: here, you wil…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos