Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : Brake pads

Vauxhall Insigna - Brake pads

Brake Pads Vauxhall Insigna (2008-2017 / mk 1, insigna a)

Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
How to Change the Rear Brake Pads on Opel Insignia
How do you change the rear brake pads on the Insignia? Lift the car with a jack and remove the rear wheel. Unscrew the caliper locking bolt, then remove the …Read all…
Posted on 24 May 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
How to Replace the Front Brake Pads of an Opel Insignia
Before you start, engage the handbrake and put the first gear in your Opel Insignia, then lift the front of the car. Begin by removing the front wheel by …Read all…
Posted on 13 May 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
Replacing Rear Brake Pads
Lift the vehicle onto suitable axle stands and remove the rear wheel (loosen the bolts before lifting); unscrew the retaining bolts of the brake caliper and …Read all…
Posted on 19 February 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
Brake Pad Replacement
Lift the vehicle with a jack and remove the front wheel; unscrew the retaining pins of the brake caliper and remove it; extract the old pads from the bracket …Read all…
Posted on 11 February 2026 by ScegliAuto
Airbag (7) Antenna (1) Car stereo (8) Battery (6) Grille (1) Transmission (2) Spark plugs (1) Glow plugs (1) Body (1) Control unit (1) Key (23) Timing belt (12) Onboard computer (6) Checks and maintenance (15) Dashboard (2) Shifter boot (1) Brake rotors (1) Headlight (8) Tail light (4) Fog lights (1) Air filter (4) Cabin air filter (11) Diesel fuel filter (5) Oil filter (1) Light bulb (3) Side marker bulb (1) Headlight bulb (15) Tail light bulb (2) Handle (1) Transmission fluid (1) Engine oil (3) Clock (5) Door trim panel (12) Front bumper (4) Rear bumper (1) Brake pads (4) Tires (2) Shift knob (8) Pump (1) Fuel pump (2) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Fuse box (30) Seat (3) Door lock (3) Side mirror (3) AdBlue warning light (5) Warning light – error code (23) Tire pressure warning light (12) Service warning light (109) Fuel cap (1) Cylinder head (1) Turbocharger (2) Windshield washer nozzle (1) Valve (1) EGR valve (3) Steering wheel (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos