Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : Transmission

Vauxhall Insigna - Transmission

Transmission Vauxhall Insigna (2008-2017 / mk 1, insigna a)

Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
Replacing the Gear Knob and Gaiter on an Opel Insignia
Start by detaching the plastic underneath the gear lever. To do this, use a small flat screwdriver or a plastic lever and pry along the joint line, working all …Read all…
Posted on 21 June 2026 by ScegliAuto
Vauxhall Insigna (2008-2017 / MK 1, Insignaa)
Automatic Gearbox Oil Change on an Opel Insignia
To change the oil in the automatic gearbox, you need to lift the car (preferably with a ramp; otherwise, use jacks and axle stands, ensuring the vehicle is …Read all…
Posted on 14 June 2026 by ScegliAuto
Airbag (7) Antenna (1) Car stereo (8) Battery (6) Grille (1) Transmission (2) Spark plugs (1) Glow plugs (1) Body (1) Control unit (1) Key (23) Timing belt (12) Onboard computer (6) Checks and maintenance (15) Dashboard (2) Shifter boot (1) Brake rotors (1) Headlight (8) Tail light (4) Fog lights (1) Air filter (4) Cabin air filter (11) Diesel fuel filter (5) Oil filter (1) Light bulb (3) Side marker bulb (1) Headlight bulb (15) Tail light bulb (2) Handle (1) Transmission fluid (1) Engine oil (3) Clock (5) Door trim panel (12) Front bumper (4) Rear bumper (1) Brake pads (4) Tires (2) Shift knob (8) Pump (1) Fuel pump (2) Car door (1) Push button (1) Instrument cluster (3) Radiator (1) Fuse box (30) Seat (3) Door lock (3) Side mirror (3) AdBlue warning light (5) Warning light – error code (23) Tire pressure warning light (12) Service warning light (109) Fuel cap (1) Cylinder head (1) Turbocharger (2) Windshield washer nozzle (1) Valve (1) EGR valve (3) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos