Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob and Gaiter on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Transmission

See other generations:
Video tutorial

Start by detaching the plastic underneath the gear lever. To do this, use a small flat screwdriver or a plastic lever and pry along the joint line, working all around the gear lever itself.

Proceed slowly and avoid breaking the plastic clips. Once you manage to lift it, disconnect the underlying connector.

Remove the gear knob by pulling it upwards with force, and then you can also remove the gaiter by sliding it off. Insert the new gaiter, connect the connector, and clip it securely into the designated spaces. Refit the gear knob by applying pressure.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacement of the gear shift knob of the Opel Insignia
Replacement of the gear shift knob of the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Today's steps will allow us to disassemble and replace the gear shift knob of the Opel Insignia's automatic transmission. First, we get into the vehi…
Replacement of the automatic gear knob of the Opel Insignia
Replacement of the automatic gear knob of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Let's see the information that will allow us to disassemble and replace the knob of the automatic gear lever of the Opel Insignia. First of all, we g…
Replacing the Gear Knob on an Opel Insignia Automatic Gear Shift
Replacing the Gear Knob on an Opel Insignia Automatic Gear Shift
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Below are the steps that will allow you to remove and replace the gear knob on the automatic gear shift of an Opel Insignia. First, get inside the ve…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos