Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wing Mirror of the Opel Vectra

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Side mirror

How to remove the external mirror of the Opel Vectra? Let's see how to dismantle the parts. Use a lever to detach the plastic part of the internal cover of the mirror (there are plastic clips). Once the cover piece is removed, unscrew the retaining screws that support the mirror. Remove the mirror along with the control cable. Fit the new mirror: thread the control cable through the door panel, screw in the retaining screws, fit the clips into the door panel, and replace the cover with the power connector. Adjust the mirror of the wing mirror.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Wing Mirror on Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Is the external mirror on your Opel Vectra broken? Replace it with a new one. Use a plastic-covered lever to pry between the perimeter of the mirror …
How to Dismantle the Heating Radiator of the Opel Vectra
How to Dismantle the Heating Radiator of the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) This guide shows the procedure necessary to dismantle and replace the heating radiator of the Opel Vectra's cabin. First, get inside the vehicle on t…
How to Remove the Fuel Pump on an Opel Vectra C
How to Remove the Fuel Pump on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This simple guide shows you how to remove the low-pressure fuel pump or the fuel sender unit on an Opel Vectra C, second series. First, open the rear…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos