Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : Disassembly of steering wheel controls on Opel Zafira

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 2, Zafira B, A05 - Years 2005-2011
Part: Steering wheel
Operation: Disassembly of steering wheel controls on Opel Zafira

With a torx wrench t20 we unscrew the fixing bolt of the right controls, which is located in the lower part of the steering wheel (see video). Unplug the connector and remove the small button area. Do the same thing with the left-hand steering wheel keypad, which will have a different plug. To open the push-button panel that has now been removed, simply lever with a small flat head screwdriver in the lower slot of the compartment, then unscrew the two small screws. If you want to change the plastic of the wheel you will only have to remove it, still leveraging it, and insert the new one by pushing it and locking it in place.


Posted on 14 February 2024 by ScegliAuto



How to remove the steering wheel on Opel Zafira
Vauxhall Zafira (2011-2019 / MK 3, Zafira C) How to remove the steering wheel of an Opel Zafira? Before disassembling the car steering wheel, disconnect the battery terminals in the engine compa
Opel Zafira dashboard disassembly guide
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) Let's see in this short guide the main steps to remove the main parts of the dashboard and instrumentation of the Opel Zafira. First of all we get on
Guide to disassembling the steering column of the Opel Zafira.
Vauxhall Zafira (1999-2005 / T98, Zafira A, MK 1) Today's guide will show us the main steps necessary to disassemble and replace the steering column of the Opel Zafira. First, we get into the car and

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos