Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Zafira
  6. : How to remove the steering wheel on Opel Zafira

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 3, Zafira C - Years 2011-2019
Part: Steering wheel
Operation: How to remove the steering wheel on Opel Zafira

How to remove the steering wheel of an Opel Zafira? Before disassembling the car steering wheel, disconnect the battery terminals in the engine compartment. Let's see how to proceed with the disassembly of the piece: remove the inspection caps on the rear part of the steering wheel (if present), then unscrew the tightening screws of the steering wheel cover (where the airbag is present) with a socket wrench (screwdriver) ). Once the airbag (driver's side) has been released, we disconnect the power supply terminals and remove it from the steering wheel. We unscrew the locking pin of the steering wheel and remove it from the barrel. To reassemble the airbag: connect the power supply terminals, then, press the same on the steering wheel with our hands and at the same time screw the rear pins.


Posted on 16 November 2023 by ScegliAuto



Guide to disassembling the steering column of the Opel Zafira.
Vauxhall Zafira (1999-2005 / T98, Zafira A, MK 1) Today's guide will show us the main steps necessary to disassemble and replace the steering column of the Opel Zafira. First, we get into the car and
How to remove the steering lock cylinder on the Opel Astra - Zafira A
Vauxhall Zafira (1999-2005 / T98, Zafira A, MK 1) Let's find out in this guide how to remove and replace the ignition cylinder and steering lock on the Opel Zafira A, but also on the Opel Astra and t
How to set the time on the Opel Zafira.
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) Today's guide will show us the steps on how to adjust the time on the Opel Zafira, following the instructions below. First, we get into the car and t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos