Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Zafira
  6. : How to disassemble the high pressure fuel pump on an Opel Zafira

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Fuel pump
Operation: How to disassemble the high pressure fuel pump on an Opel Zafira

Let's see how to disassemble the high pressure fuel pump on an Opel Zafira. We lift the bonnet and put it in safety, then, we remove the soundproofing panel of the engine; with a screwdriver we unscrew the locking pins of the ventilation pipe and remove the piece from the engine compartment. We begin to disassemble the pump clamping pins as shown in the video. Once the piece has been disassembled from its seat: let's disconnect the clamp on it. Finally we reassemble the high pressure fuel pump in the engine compartment, the intake pipe and the soundproofing panel of the engine.


Posted on 9 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Zafira 2005-2011 - Where is the fuel pump of the Opel Zafira located? Read Answer
    • Zafira 2005-2011 - What problems could the fuel pump of the Opel Zafira have? Read Answer
    • Zafira 2005-2011 - Where is the fuel pump of the Opel Zafira located? Read Answer
    • Zafira 1999-2005 - What is the location of the fuel pump on the Opel Zafira? Read Answer
    • Zafira 1999-2005 - Where is the fuel pump located in the Opel Zafira A? Read Answer
    • Zafira 2011-2019 - Where is the fuel pump located in the Opel Zafira? Read Answer
    • Zafira 2011-2019 - Where is the petrol pump of the Opel Zafira Tourer located? Read Answer
    • Zafira 1999-2005 - Where is the petrol pump of the Opel Zafira A located? Read Answer
    • Zafira 2005-2011 - How much does it cost to replace the fuel pump on an Opel Zafira? Read Answer
    • Zafira 2005-2011 - How much does an Opel Zafira diesel pump cost? Read Answer
    • Zafira 2005-2011 - Where is the petrol pump of the Opel Zafira 1600 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos