Do it yourself
Frequently asked questions about cars and motorcycles

Rear Light Replacement Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Open the boot lid and remove the cover. Pull firmly on the side plastic that leads to the light, removing it. Disconnect the wiring and unscrew the white cap. At this point, the light can be removed.

To change any bulb in the light, simply detach the rear part of the housing from the upper part, splitting it in the middle (see video). If you do not intend to change the bulb but want to replace the outer housing of the light, fit this with the inner housing of the light removed.

Reassemble everything in reverse order.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) Today's instructions will allow us to disassemble and replace the rear light and its bulbs of the Opel Corsa in simple steps. First, let's open the r…
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear light of your Opel Corsa not working anymore? Let’s see how to replace the rear light bulbs. Open the boot; remove the insp…
Vauxhall Corsa (2006-2014 / Corsa D) In these brief and simple steps, you will see the procedure for removing and replacing the bulbs of the third brake light on an Opel Corsa. First, op…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos