Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Tail light bulb

Are the bulbs in the rear light of your Opel Corsa not working anymore? Let’s see how to replace the rear light bulbs. Open the boot; remove the inspection covers from the back of the light. Unscrew the securing pins (plastic) of the light and remove it from its housing (disconnect the power terminals). Disconnect the bulb holders from the light, replace the damaged bulbs with new ones (same voltage and size as the original). Finally, reassemble the light with all the attached components (reverse the assembly of the parts).

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on an Opel Corsa
How to Replace the Rear Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Are the bulbs in the rear headlight of your Opel Corsa no longer working? Learn how to replace the rear headlight bulbs. Open the boot lid, then remo…
How to Replace the Rear Light Bulbs on an Opel Corsa
How to Replace the Rear Light Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions needed to remove and replace the rear light bulbs on an Opel Corsa. First, open the boot lid and start by opening the side…
How to Replace the Rear Lamp Bulb on Opel Corsa
How to Replace the Rear Lamp Bulb on Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Are the rear lamp bulbs blown? Here's how to remove them from inside the lamp. Lift the tailgate of the Opel Corsa, identify the parts to disassemble…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos