Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Steering Arm Replacement

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Control arm

See other generations:
Video tutorial

Lift the vehicle, secure it, and remove the wheels. Remove the split pins with pliers, unscrew the nuts, and extract the retaining pins of the arm from the suspension.

Remove the clamps of the rubber boots protecting the tie rods. Next, unscrew the nut that holds the tie rod on the wheel hub, then unscrew the nut on the tie rod that connects it to the steering box. At this point, the tie rod can be removed.

Refit the rubber boots on the new tie rods, replace the metal gaskets with new ones, and refit the tie rods securing the rubber boots using hose clips. It is also advisable to replace the rubber boots.

Adjust the tie rods to correctly align the wheels.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Steering Lock on the Opel Corsa
Replacing the Steering Lock on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today's guide will show you how to remove and replace the steering lock on the Opel Corsa, following the instructions below. First, get inside the ca…
Guide to replacing the steering angle sensor of the Opel Corsa
Guide to replacing the steering angle sensor of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The following steps will show us how to disassemble and replace the steering angle sensor of the Opel Corsa. First, we get into the car and start by …
Replacing the Wiper Blades on the Opel Corsa D
Replacing the Wiper Blades on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In today's tutorial, you will learn how to remove and replace the front wiper blades on the Opel Corsa D in simple and quick steps. First, lift the f…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos