Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Steering Tie Rod End

Model: Vauxhall Zafira Zafira A, T98, MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Control arm

See other generations:
Video tutorial

If you notice play in the steering wheel or noise while driving over bumps coming from the front wheel, it is likely that the tie rod end of the steering box is damaged: lift the vehicle, remove the front wheel, and unscrew the fixing nut of the tie rod end from the hub; if possible, use the appropriate puller to remove the tie rod end from the hub seat or use a hammer as shown in the video; then loosen the lock nut on the tie rod and unscrew the old tie rod end (count the number of turns to try to maintain alignment); then screw in the new one with the same number of turns and secure the tie rod end to the hub by tightening the locking nut; then tighten the lock nut.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the High-Pressure Fuel Pump on an Opel Zafira 2.2
Replacing the High-Pressure Fuel Pump on an Opel Zafira 2.2
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) This guide will illustrate the main steps on how to remove and replace the high-pressure fuel pump on an Opel Zafira 2.2. First, open the bonnet of t…
Replacing Wiper Blades
Replacing Wiper Blades
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Before proceeding with the replacement of the wiper blades, ensure you have purchased the correct length (generally, the two blades are not the same …
Replacing Front Headlight Bulbs on an Opel Zafira
Replacing Front Headlight Bulbs on an Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) Lift the bonnet and insert the support rod. To replace the front indicator bulb, simply unscrew the rear cover, and the bulb will come out. Pull it o…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos