Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery of an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Key

We start by holding down the button located on the rear side of the electric key of our Opel Mokka, and then. After that, we will have to extract the physical emergency key, and then pry it with a slotted screwdriver. Once this is done, we will have to disengage and remove the back side of the key. Once we have removed the back side, we will have reached the key's dead battery. At this point we will have to remove the battery from its housing, and the disassembly will be completed. To fit the new battery and close the key, we will have to follow these steps in reverse, and the replacement will be completed.

Posted on 7 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery of an Opel Mokka
How to replace the key battery of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let's start by pressing the button located on the upper side of the electric key of our Opel Mokka, and then extracting the physical emergency key. N…
How to replace the battery in the Opel Mokka?
How to replace the battery in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial we can see how to replace the battery in the Opel Mokka, an extremely simple and quick operation. First of all, make sure that the k…
How to replace the Opel Mokka key battery
How to replace the Opel Mokka key battery
Vauxhall Mokka (2012-2019 / Mokka A) In this guide we will see how to replace the Opel Mokka remote control / key battery. In the remote control with extractable key, just take the side …

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos