Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on an Astra J

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Front bumper

Let's see how to remove the front bumper on an Opel Astra. Remove the bumper to replace it with a new one. Lift the car on a jack, then unscrew the securing screws located at the top of the bumper to start. Once the screws at the top are removed, take off the front grille located at the centre of the bumper. Unscrew the screws in the wheel arch liners (remove the pins at the bottom of the bumper). Remove the bumper by hand from the front of the car (disconnect any electrical terminals of the fog lights). Fit the new bumper and screw in all the securing screws. Complete the bumper installation with the central grille.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Front Bumper on an Opel Astra J
How to Install the Front Bumper on an Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) Installing the front bumper on the third generation Opel Astra is quite simple, and the operation is easier if the vehicle is on a lift. Start by ope…
Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
Removing the Rear Bumper of the Opel Astra
Removing the Rear Bumper of the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) This guide briefly outlines the steps to remove and replace the rear bumper of the Opel Astra. First, open the boot lid and begin unscrewing all the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos