Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Replacement

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

This video illustrates how to replace the front bumper of your car. To start, remove the old bumper; once it is off, you can begin installing the new front bumper. First, position the new bumper in its housing; at the sides near the wheels, simply clip the bumper into place.

For the clip underneath the bonnet, just screw in the relevant screws into their positions, securing the bumper properly. Once the installation is complete, check if it has been fitted correctly and properly.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Fit the Front Bumper on an Opel Astra K
How to Fit the Front Bumper on an Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) How do you fit the front bumper yourself? Let's see how to install the bumper on the Opel Astra. Position the front bumper perfectly on the vehicle b…
Removing the Front Bumper on an Astra J
Removing the Front Bumper on an Astra J
Vauxhall Astra (2009-2016 / Astra J) Let's see how to remove the front bumper on an Opel Astra. Remove the bumper to replace it with a new one. Lift the car on a jack, then unscrew the s…
How to Remove the Front Bumper of the Opel Astra
How to Remove the Front Bumper of the Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Follow these main instructions to remove and replace the front bumper of the Opel Astra. First, open the bonnet of your car and start unscrewing the …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos