Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs in an Opel Corsa D 1.3 CDTi

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Glow plugs

In today’s video, you will learn how to disassemble and replace the glow plugs in the engine of an Opel Corsa D 1.3 CDTi. First, lift the bonnet and remove the plastic engine cover; then unscrew the clamps of the intake hoses and remove them as well. At this point, disconnect the four electrical connectors of the glow plugs and unscrew them one by one using a socket spanner with an extension; simply replace them with new ones, screwing them in by hand first and then tightening with the spanner. Finally, reconnect the connectors and reassemble all other components!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on Opel Corsa 1.3 CDTI - Fiat Punto 1.3 MultiJet
How to Replace the Glow Plugs on Opel Corsa 1.3 CDTI - Fiat Punto 1.3 MultiJet
Vauxhall Corsa (2006-2014 / Corsa D) Discover in this video how to disassemble and replace the engine glow plugs on the Opel Corsa 1.3 CDTI, as well as on the Fiat Punto 1.3 MultiJet (bo…
Guide to replacing the timing chain of the Opel Corsa 1.3 CDTi
Guide to replacing the timing chain of the Opel Corsa 1.3 CDTi
Vauxhall Corsa (2006-2014 / Corsa D) Today's guide will show us the essential information useful for replacing the timing chain of the Opel Corsa 1.3 CDTi. The manufacturer declares that…
How to Replace the Spark Plugs on an Opel Corsa
How to Replace the Spark Plugs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. Begin by removing the engine cover. This will give you the necessary space to work on the e…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos