Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the glow plugs in the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Glow plugs
Operation: How to replace the glow plugs in the Opel Corsa?

In this video we can see how to replace the glow plugs in the Opel Corsa D. After getting a 7mm socket wrench, an 8mm spark plug wrench and a Torx T25 screwdriver, we open the engine hood and start by removing the plastic cover. With the Torx screwdriver and the 7mm wrench, we disassemble the intake manifold, plug the hole with a cloth and disconnect the power connectors of the glow plugs. Next, we start to slowly unscrew them, applying some unlocking spray if necessary. To tighten the replacement glow plugs we use a torque wrench set at 10nm.


Posted on 8 April 2024 by ScegliAuto



Opel Corsa 1.3 glow plug replacement
Vauxhall Corsa (2006-2014 / Corsa D) Let's see the replacement of the glow plugs of an Opel Corsa Diesel. We raise the hood to access the engine compartment and begin the disassembly of
Replacing the glow plugs on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Hello everyone! Today we show you how to replace the glow plugs on Opel Corsa D. Raise the hood and put the appropriate support rod. Disconnect the a
How do you replace the spark plugs on the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To be able to replace the glow plugs on the Opel Corsa, you need to open the hood to gain access to the engine compartment and remove the plastic cov

    Frequently Asked Questions

    • Corsa 2014-2019 - What to do if the glow plug warning light on Opel Corsa E comes on? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos