Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Glow Plugs on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Glow plugs

Hello everyone! Today, you will learn how to replace the glow plugs on an Opel Corsa D. Lift the bonnet and insert the support rod. Disconnect the air duct as shown in the video, which will give you access to the glow plug connections. Disconnect them and unscrew the plugs using an 8 mm socket. Lubricate the new glow plugs with suitable grease, then insert them and screw them in. Once done, continue to reassemble in reverse order. As you can see, this is a fairly simple operation and, with the right attention, it is within everyone's reach.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) In today’s video, you will learn how to disassemble and replace the glow plugs in the engine of an Opel Corsa D 1.3 CDTi. First, lift the bonnet and …
Vauxhall Corsa (2006-2014 / Corsa D) In this video, we can see how to replace the glow plugs in an Opel Corsa D. After obtaining a 7mm socket, an 8mm spark plug socket, and a Torx T25 sc…
Vauxhall Corsa (2006-2014 / Corsa D) Discover in this video how to disassemble and replace the engine glow plugs on the Opel Corsa 1.3 CDTI, as well as on the Fiat Punto 1.3 MultiJet (bo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos