Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Column and EPS from the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Follow these step-by-step instructions in this video to remove the steering column and EPS from the Opel Corsa. First, disconnect the battery; then, get into the vehicle and remove the airbag and steering wheel by disconnecting the electrical connector and undoing the central bolt.

Next, remove the plastic cover around the steering wheel and unscrew the screws underneath; disconnect the various electrical wiring to also remove the indicator stalk and wiper lever. Now, remove the steering column and EPS!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to replace the ignition switch on the Opel Corsa?
How to replace the ignition switch on the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the ignition switch on the Opel Corsa, pry at the back of the steering column to detach the plastic cover from the top of the column. Once…
How to Remove the Instrument Cluster from an Opel Corsa C?
How to Remove the Instrument Cluster from an Opel Corsa C?
Vauxhall Corsa (2000-2006 / Corsa C) To remove the instrument cluster from an Opel Corsa, first remove the steering wheel by unscrewing the central pin, then lever off the plastics aroun…
How to Replace the Instrument Cluster Bulb on an Opel Corsa?
How to Replace the Instrument Cluster Bulb on an Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) To replace the instrument cluster bulb on an Opel Corsa, loosen the screws located in the centre and lower part of the steering column. This allows a…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos