Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on an Opel Corsa C

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Service warning light

To reset the service light on an Opel Corsa C, simply follow the steps in this short video. Note that the same procedure is used to reset the service light on an Opel Tigra B. Sit in the driver's seat and hold down the reset button on the car's speedometer for 5 seconds. While still holding it, turn on the ignition without starting the engine and keep the button pressed for another 10 seconds. After 10 seconds, you will see the service message flash on the screen, which will then change to 4 dashes. Once the partial mileage reappears on the screen, you can release the button and turn off the ignition.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Opel Corsa D
How to Reset the Service Light on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) This video tutorial shows the procedure to reset the service light on an Opel Corsa D. This procedure is very simple and quick, requiring no special …
Resetting the Service Light on the Opel Corsa
Resetting the Service Light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Discover the procedure to reset the service light for the routine maintenance oil change on the Opel Corsa. First, get in the vehicle and turn on the…
How to Reset the Service Light on an Opel Corsa
How to Reset the Service Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To correctly reset the service light on your Opel Corsa D, follow these simple instructions. First, ensure the engine is off, then locate the button …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos