Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position and Diagram of the Fuse Box on the Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Fuse box

In this tutorial video, we will look at the positioning and diagram of the fuses on the Opel Vivaro, following the instructions below. First, locate the internal fuse box by removing the plastic panel on the driver's side; use the user manual to find the fuse diagram (also located on the inside of the cover). Next, locate the fuse box in the engine compartment; it is next to the battery, covered by a plastic lid. Replace any blown fuses with ones of the same amperage!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and positioning of the fuses in the Opel Vivaro.
Diagram and positioning of the fuses in the Opel Vivaro.
Vauxhall Vivaro (2014-2019 / MK 2) In this guide, we will see the instructions regarding the layout and positioning of the fuse boxes of the Opel Vivaro. First, we open the front drive…
Fuse Diagram and Positioning for the Opel Vivaro
Fuse Diagram and Positioning for the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) The following steps will illustrate how to access the fuse boxes of the Opel Vivaro, also retrieving the diagram and layout. First, get inside the ve…
What is the fuse box diagram of the Opel Vivaro c used for?
What is the fuse box diagram of the Opel Vivaro c used for?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) The fuse box diagram, or rather the fuse boxes, of the Opel Vivaro C, is the document that allows us to search in the fuse box, each of these, as wel…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos