Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate the Battery of the Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Battery

This guide shows how to locate the position of the battery in the Opel Vivaro. You need to enter the cabin to perform this operation. On the floor, on the passenger side, there is the battery compartment. After lifting and removing the mat, you will need to remove a rubber panel protecting the battery compartment to expose the compartment cover. Unscrew the fastening screws of the cover to access the Vivaro's battery. To replace the battery, disconnect the terminal connectors and the securing bracket. Once the new battery is installed, close the compartment with the cover and reposition the rubber mat and carpet.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on an Opel Vivaro B
Where to Find the Fuse Box on an Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) If you experience issues with one or more electrical components in your Opel Vivaro B, you can target the respective fuses. In this guide, you will l…
Replacing the Battery on an Opel Vivaro 1.6 CDTi
Replacing the Battery on an Opel Vivaro 1.6 CDTi
Vauxhall Vivaro (2014-2019 / MK 2) Here are step-by-step instructions on how to remove and replace the battery on an Opel Vivaro 1.6 CDTi. First, open the vehicle's bonnet and start by…
How to Replace the Remote Battery on the Opel Vivaro?
How to Replace the Remote Battery on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To replace the remote battery on the Opel Vivaro, pry open the bottom of the device to detach the cover on the back of the remote. Once the cover is …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos