Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Opel Vivaro?

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

To replace the battery in the Opel Vivaro, open the bonnet to access the components in the engine compartment. In the upper right part of the compartment, you will find the device under the corresponding cover.

Once this is removed, loosen the screws that secure the battery in place and disconnect the power cables. At this point, insert the new replacement part, connect it, and secure it properly to ensure everything functions correctly.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to change the battery in the remote control of the Opel Vivaro 3
How to change the battery in the remote control of the Opel Vivaro 3
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) If you want to quickly and safely change the battery inside the remote control of your third generation Opel Vivaro, simply follow the procedure desc…
How to Replace the Remote Battery on the Opel Vivaro?
How to Replace the Remote Battery on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) To replace the remote battery on the Opel Vivaro, pry open the bottom of the device to detach the cover on the back of the remote. Once the cover is …
How to Replace the Key Battery on the 2008 Opel Vivaro
How to Replace the Key Battery on the 2008 Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Before discovering how to replace the battery in your 2008 Opel Vivaro key, obtain a flathead screwdriver. Once you have that, take the screwdriver a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos