Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Fog Light Bulbs

Model: Vauxhall Vectra Vectra C, MK 3 - Years 2002-2008
Part: Light bulb

To replace the front fog light bulb, remove the front bumper: start by unscrewing the fixing screws of the bumper at the wheel arch and then remove the plastic clips along the inner edge of the bumper. Once all screws and clips are removed, detach the side edge from the wing and take off the bumper from its position. At this point, you can take out the fog light from the bumper, disconnect the power connector, and retrieve the spacer to apply to the new fog light; proceed in reverse for installation.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlights of the Opel Vectra
How to replace the front headlights of the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Briefly, we will see the steps that will allow us to disassemble and replace the front headlights of the Opel Vectra. First, we open the hood of our …
Where are the fuses located in the Opel Vectra?
Where are the fuses located in the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuse boxes of the Opel Vectra are responsible for containing the fuses that regulate the operation of the devices inside the vehicle: in this car…
Where are the fuses located in the Opel Vectra?
Where are the fuses located in the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuse boxes of the Opel Vectra serve to contain the fuses that regulate the operation of the devices installed on the vehicle: in this type of car…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos