Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Cabin air filter

To replace the cabin filter in an Opel Mokka, open the glove compartment on the passenger side and detach the side clips. Once removed, fully pull out the glove compartment to access the components at the back. You will find the cover of the filter box, which needs to be removed to extract the old filter from its housing. Insert the new filter, close the box with the cover, and reinstall the glove compartment.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Filter on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let's see how to remove the cabin pollen filter on the Opel Mokka: open the glove compartment and pull the drawer inside the dashboard using a plasti…
How to Replace the Cabin Filter on the Opel Mokka?
How to Replace the Cabin Filter on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To replace the cabin filter on the Opel Mokka, open the glove compartment located on the passenger side and unclip the side clips to remove the compa…
How to Change the Cabin Air Filter on the Opel Mokka X
How to Change the Cabin Air Filter on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) If you want to discover how to correctly change the cabin air filter of your Opel Mokka X, then you are in the right place. In the following guide, y…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos