Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: AdBlue warning light

AdBlue is a special additive used in diesel engines to reduce pollution levels. After many miles driven, it can run out, resulting in a warning light appearing on your dashboard. Resolving this issue is very simple and can be done in a few minutes without difficulty. Switch off the engine and go to the fuel filler flap. Open it and locate the blue cap. Remove it completely by unscrewing. At this point, using a funnel and a rubber hose, pour the new AdBlue additive inside until it is completely full. Screw the cap back on and close the flap. The problem is now completely resolved.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to top up AdBlue and reset the warning light on the Opel Vivaro
How to top up AdBlue and reset the warning light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today we will discover the instructions that will allow us to top up the AdBlue liquid, consequently resetting the message on the display of the Opel…
How to reset the AdBlue top-up warning on the Opel Vivaro
How to reset the AdBlue top-up warning on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) These short and simple instructions will show us how to reset the AdBlue fluid top-up warning on the Opel Vivaro. First of all, we get into the vehic…
Resetting the AdBlue warning light on the Opel Vivaro
Resetting the AdBlue warning light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In this guide, we will see the main steps that will allow us to reset the warning light for topping up the AdBlue liquid in the Opel Vivaro. Before r…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos