Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Windshield wipers

This tutorial shows how to replace the wiper blades on an Opel Mokka. In addition to the wiper blades, you will need adapters; the video demonstrates the use of Bosch Aerotwin AP 650 U and AP 13 U blades. With the new blades ready, start by removing the old ones. Begin on the passenger side by slightly lifting the wiper arm, pressing the release tab, and pulling the blade outwards. Gently lower the arm and insert the adapter into the new blade, then mount it onto the arm until you hear a "click". For the driver’s side wiper, repeat the process: lift the arm, remove the blade, assemble the adapter with the new blade, and remount it onto the support. Always be cautious of the arm's range of motion; if lifted too high, it may hit the bonnet and damage the paint.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wiper Blades on an Opel Mokka
Replacing the Wiper Blades on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, you will see step-by-step instructions for removing and replacing the wiper blades on a first series Opel Mokka. First, move …
How to replace the front wipers on the Opel Mokka X
How to replace the front wipers on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, see how to remove and replace the front wipers, as well as the rear one, on the Opel Mokka and Mokka X, following these simpl…
Replacement of the front windshield wipers of the Opel Mokka
Replacement of the front windshield wipers of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) The instructions in this guide will show us how to disassemble and replace the front wipers of the Opel Mokka, in simple steps. First, move to the fr…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos