Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: V-belt

See other generations:
Video tutorial

Before you begin, lift the front of your Opel Mokka and then remove the front right wheel. Start by unscrewing and removing the screws that secure the serpentine belt cover, then detach and remove the cover itself.

Next, remove the air filter housing. Once done, loosen the tensioner.

This will free the serpentine belt. Proceed to detach and remove the belt, and you will have completed the disassembly.

To fit the new belt, repeat these instructions in reverse, and the replacement will be complete.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on an Opel Mokka?
How to Replace the Timing Belt on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To replace the timing belt on an Opel Mokka, it is advisable to remove the engine block from its housing. Once the engine has been removed, you can d…
Replacement of the water pump of the Opel Mokka 1.6 Ecotec
Replacement of the water pump of the Opel Mokka 1.6 Ecotec
Vauxhall Mokka (2012-2019 / Mokka A) Let's see the information regarding the disassembly and replacement of the water pump of the Opel Mokka 1.6 Ecotec. In order to access the water pump…
How to Replace the Timing Belt on the Opel Mokka?
How to Replace the Timing Belt on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) You can replace the timing belt on the Opel Mokka by lifting the car with a jack or a ramp, so that the front right wheel is removed along with its w…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos