Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the water pump of the Opel Mokka 1.6 Ecotec

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

Let's see the information regarding the disassembly and replacement of the water pump of the Opel Mokka 1.6 Ecotec. In order to access the water pump, it is necessary to first remove the engine support, thermostat, and air filter box; then lift the vehicle and remove the right front wheel, subsequently removing the crankshaft pulley and disconnecting the V-belt, as shown in the video.

Once the coolant pipe is disconnected, it will be possible to unscrew the screws of the water pump housing, replacing the entire kit with the new original one.


Posted on 29 January 2025 by ScegliAuto


Related tutorials

Replacing the Water Pump on the Opel Mokka
Replacing the Water Pump on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's main steps will show you the procedure for removing and replacing the water pump on the Opel Mokka. First, open the bonnet of the vehicle and…
Replacing the Timing Belt and Water Pump on the Opel Mokka 1.7 CDTI
Replacing the Timing Belt and Water Pump on the Opel Mokka 1.7 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you the main steps on how to remove and replace the timing belt on the Opel Mokka 1.7 CDTI. First, open the bonnet of your ca…
What Does the "MIL" Light Mean on an Opel Mokka?
What Does the "MIL" Light Mean on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When the "MIL" (Malfunction Indicator Lamp) light activates on the dashboard of your Opel Mokka, it indicates a general malfunction with the emission…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos