Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt and Water Pump on the Opel Mokka 1.7 CDTI

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Timing belt

Today's guide will show you the main steps on how to remove and replace the timing belt on the Opel Mokka 1.7 CDTI. First, open the bonnet of your car and start by removing the air filter box and the plastic cover; then raise the vehicle and remove the front right wheel, subsequently removing the timing belt as illustrated in the video. At this point, remove the timing cover to access the belt, taking it off and replacing it with the new one (with the original), following the video tutorial to the end!

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Opel Mokka 1.7 CDTI
Replacing the Timing Belt on the Opel Mokka 1.7 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial, discover the main steps to remove and replace the timing belt on the first series Opel Mokka with a 1.7 CDTI engine. First, lift th…
Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, we will follow useful tips that will allow us to remove the timing chain from an Opel Mokka 1.6 CDTi. First, lift the vehicle…
Replacement of the water pump of the Opel Mokka 1.6 Ecotec
Replacement of the water pump of the Opel Mokka 1.6 Ecotec
Vauxhall Mokka (2012-2019 / Mokka A) Let's see the information regarding the disassembly and replacement of the water pump of the Opel Mokka 1.6 Ecotec. In order to access the water pump…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - When should I change the timing belt on the Opel Mokka 1.7? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos