|
Do it yourself
| |||
| ||||
How to Replace the Timing Belt on the Opel Mokka
Model: Vauxhall Mokka
Mokka A
- Years 2012-2019
Today, you will see how to remove and replace the timing belt on the Opel Mokka produced from 2012 to 2019, independently. Pull the bonnet release lever and engage the handbrake. Block the rear wheels and remove the wheel nuts and caps. Fit the adapter for the wheel locking nuts, loosen the bolts, and place the jack under the vehicle. Lift the vehicle and remove the front right wheel. Loosen the fasteners and remove the right front wheel arch lining. Use a socket or spanner on the raised projection of the tensioner, rotate the tensioner against the spring tension, and hold it in this position to insert a suitable drill. Slide the drive belt off the pulleys and remove it from the engine. Rotate the pin back and position the new belt. Reposition the tensioner and spring, then refit the front right wheel and lower the vehicle.
Posted on 15 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Mokka
(2012-2019 /
Mokka A)
To replace the timing belt on an Opel Mokka, completely remove the front right wheel by loosening the bolts and detaching the inner cover of the whee…
Vauxhall Mokka
(2012-2019 /
Mokka A)
In this tutorial, discover the main steps to remove and replace the timing belt on the first series Opel Mokka with a 1.7 CDTI engine. First, lift th…
Vauxhall Mokka
(2012-2019 /
Mokka A)
Today's guide will show you the main steps on how to remove and replace the timing belt on the Opel Mokka 1.7 CDTI. First, open the bonnet of your ca…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |