Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing chain of the Opel Mokka 1.6 CDTI

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Timing belt

Today we will discover the process of how to disassemble and replace the timing chain of the Opel Mokka 1.6 CDTI. First, we open the hood of the car and start by removing the coolant reservoir and the battery; we also disconnect various hoses to access the timing chain, as shown in the video. Now we remove the valve cover and the timing chain cover, lifting the car to proceed with the disassembly of the chain; we replace it with the new one, as well as with the original one, following the video tutorial until the end!

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, we will follow useful tips that will allow us to remove the timing chain from an Opel Mokka 1.6 CDTi. First, lift the vehicle…
Phase points for replacing the timing chain of the Opel Mokka 1.6 CDTi
Phase points for replacing the timing chain of the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) In this video we can see, well illustrated, the timing points for the removal of a distribution chain of an Opel Mokka 1.6 CDTi; this operation must …
How to Replace the Timing Chain on an Opel Mokka?
How to Replace the Timing Chain on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) Firstly, note that the work shown in the video was performed on an Opel Mokka 1.6 16v CDTi. With that said, proceed by opening the bonnet and removin…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - When should I change the timing belt on the Opel Mokka 1.7? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos