Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Timing belt

Firstly, note that the work shown in the video was performed on an Opel Mokka 1.6 16v CDTi. With that said, proceed by opening the bonnet and removing the engine head, following all the steps illustrated above. Additionally, the intake manifold must be removed to access the timing chain, which is located on the right side of the engine. Remove the bearing, the chain tensioner, the chain guide, and finally slide the chain out of its housing for replacement.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Instructions for Removing the Timing Chain on the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, we will follow useful tips that will allow us to remove the timing chain from an Opel Mokka 1.6 CDTi. First, lift the vehicle…
How do you replace the timing chain of the Opel Mokka?
How do you replace the timing chain of the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In order to replace the timing chain on the Opel Mokka, you need to open the hood and then remove the front right wheel and corresponding fender: onc…
Guide to replacing the timing chain of the Opel Mokka 1.6 CDTI
Guide to replacing the timing chain of the Opel Mokka 1.6 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) Today we will discover the process of how to disassemble and replace the timing chain of the Opel Mokka 1.6 CDTI. First, we open the hood of the car …

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - When should I change the timing belt on the Opel Mokka 1.7? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos